JINDAO Antistatic HPL
Jindao Antistatic HPL is high pressure laminate with a
very tough surface, particularly suitable for raised access
flooring systems. HPL has become the standard in equipment
& computer room design because of its ease of maintenance
and its unique ability to dissipate static electricity.
Download
Jindao Antistatic HPL Catalogue (95 kb).
|
Jindao
Antistatic HPL Order Information
Order format example:
Jindao HPL A4, 2010, 1.2 mm, Antistatic
HPL dimension: 610 x 610 mm
Order quantity: minimum 4000 pieces per color pattern
|
|
Product grades
|
A4
+ 400 revs.
A10
+ 1000 revs.
A30
+ 3000 revs.
|
|
|
|
Thickness available
|
1.0 mm
1.2 mm
1.5 mm
|
|
Electrical resistance
|
antistatic 1x10^8~1x10^11 Ohms
dissipating 1x10^6~1x10^7 Ohms
|
|
Jindao Antistatic
HPL Technical Information
|
|
Abrasion resistance
EN438/2.6
|
400 revs.
1000 revs.
3000 revs.
|
|
Dry heat resistance
EN438/2.8
|
OK
|
|
Impact resistance - small diameter
sphere
EN438/2.11
|
20 N
|
|
Stain resistance
EN438/2.15
|
OK degree
no important alteration
|
|
Resistance to cigarettes
EN438/2.18
|
OK
no important alteration
|
|
Electrical resistance
NFPA 99
|
antistatic 1x10^8~1x10^11 Ohms
dissipating 1x10^6~1x10^7 Ohms
|
|
Resistance to immersion in hot water
EN438/2.7
|
6 %
|
|
Dimensional stability at high temperatures
EN438/2.9
|
0,5 L 1,0 T %
|
|
Scratch resistance
EN438/2.14
|
2,5 N
|
|
Colour fastness under light
EN438/2.16
|
6 degree
|
|
Resistance to steam
EN438/2.24
|
OK
no important alteration
|
|
Density
DIN 53 479
|
1400 Kg/mc
|
|
Jindao Antistatic
HPL FAQ
|
What is an HPL laminate?
According to the European standard UNI EN 438, high pressure
decorative laminates (HPL) are materials manufactured with
layers of fibrous material (e.g. paper) impregnated with
thermosetting resins, bonded by heat at a pressure not lower
than 7 MPa, where one or both external surfaces are coloured
or have decorative patterns. High pressure decorative laminates
(HPL), as defined in the above mentioned standard, are made
up of internal layers impregnated with phenolic and/or aminoplastic
resins, and of one or more surface layers of aminoplastic
resins (mainly melamine resins).
<< back
to top
What are the main features of HPL laminates?
The main features are as follows:
- High scratch resistance
- High abrasion resistance
- High impact resistance
- Excellent moisture resistance
- Good water resistance
- Good vapour resistance
- Excellent resistance to high temperatures
- Good resistance to chemicals
- Ease of cleaning
- Good dimensional stability
- Excellent reaction to fire with low fumes
- Special antistatic properties << back
to top
How do you clean HPL?
High pressure decorative surfaces must be treated with the
same care given to other common furniture surfaces. It is
good practice always to keep the surfaces clean and dry.
In case of neglect or tenacious dirt, it is generally possible
to obtain good results in the cleaning of HPL surfaces by
following the recommendations indicated in the table below.
These instructions can be observed in most cases, however,
they do not claim to solve any possible case that may emerge,
because factors such as state of wear of the surface, type
and quantity of deposits and the length of time these have
remained on the surface, are essential in determining how
easy it is to remove the stains. The following recommendations
will be ineffective if the laminate has been considerably
altered by chemical, physical or mechanical interventions.
<< back to top
How does HPL react to fire?
HPL laminates are rarely flammable and have "flame spreading"
retardant properties, therefore allowing more time for evacuation
procedures. << back to top
Are there any technical standards which
specify characteristics and test methods for HPL laminates?
The reference standard for HPL laminates is UNI EN 438.
<< back to top
What precautions must be taken for the transport
of laminates?
Storage and transport must be performed in accordance with
the manufacturer's recommendations. No special precautions
need be taken.
As to transport, HPL laminates are classified as non-dangerous
material. No labelling is required.
- During transport, flat and stable pallets must be used
at all times, ensuring that the panels do not move.
- During loading and unloading operations, care must be
taken to prevent panels sliding over each other. They
must be lifted by hand, or by a lifting device provided
with a sucker.
- Soiling, foreign bodies and sharp edges can damage the
surfaces if the panels are allowed to rub together. <<
back to top
